Buttons
The controls of the Smart Radiator Valves are mechanical and non-tactile.
Turn the Valve until there is a slight "click", to the right to increase the
setpoint by 0.5°C and to the left to decrease it.
Demonstration video
Screen
The Valve screen is made of flexible electronic paper (e-paper). This type of screen consumes energy only when the state of
the blocks (white or black) is changed. Consequently, it is normal that the display persists when the batteries are removed.
The characteristics of this screen allow the Valve to have an excellent battery lifespan of 2 years.
Notes:
• The Valve integrates an accelerometer that allows to automatically display the information on the screen in the right
direction of reading. More info on screen technology here: description page of the Thermostat screen.
• The Relay supplied with the Starter Pack works in the same way as that of the Thermostat: see the presentation of the
Relay. On the other hand, it cannot be substituted for a Thermostat Relay because it cannot ensure the switching of the
heating.
To Next Page
Loading...
Need help?
General