Product Manual, TNSR 19.02
TNSR software is available pre-installed on Netgate hardware or as a Bare Metal Image (BMI) for use on Commercial
Off the Self (COTS) hardware or in virtual environments. For quotes, updates, and more information about TNSR,
please visit tnsr.com or contact TNSR sales.
General System Requirements
• 64-bit x86 processor with SSE4.2 extensions
• Minimum of 4GB RAM for basic routing functionality
RAM requirements increase significantly if the installation will need to handle large volumes of connections,
large volumes of routing data (e.g. full BGP feeds), or multiple worker threads.
See also:
See Memory Usage and Tuning for information on how to determine optimal memory sizes based on what the
router must handle.
• Minimum of 20GB Storage
• Minimum of two network interface ports, three network interface ports recommended (two for dataplane, one
for management)
• Option to disable Secure Boot if using UEFI, as it is incompatible with the TNSR dataplane
Compatibility
TNSR is a platform for high-speed packet processing, delivered as services that run on top of an operating system.
TNSR 21.11 and later are based on Ubuntu, currently the 20.04 LTS release for x86 processors. This platform has
been tested by Netgate, so that means most compatibility questions can be resolved by checking whether the hardware
can run Ubuntu Linux 20.04.
• Tested Platforms
• Untested Platforms
SOFTWARE DOCUMENTATION 1
To Next Page
Loading...