Product Manual, TNSR 19.02
(continued from previous page)
-n TNSR-WAN-Subnet \
--address-prefixes 10.5.0.0/24
$ az network vnet subnet create \
-g TNSR-Resource-Group \
--vnet-name TNSR-VNet \
-n TNSR-LAN-Subnet \
--address-prefixes 10.5.1.0/24
$ az network vnet subnet create \
-g TNSR-Resource-Group \
--vnet-name TNSR-VNet \
-n TNSR-MGMT-Subnet \
--address-prefixes 10.5.2.0/24
6. Create Public IPs to be used by WAN and Management interfaces.
$ az network public-ip create \
-g TNSR-Resource-Group \
-n TNSR-WAN-IP
$ az network public-ip create \
-g TNSR-Resource-Group \
-n TNSR-MGMT-IP
7. Create a Network Security Group (NSG).
$ az network nsg create -n TNSR-MGMT-NSG -g TNSR-Resource-Group
$ az network nsg rule create \
--name MGMT_Allow_SSH \
--nsg-name TNSR-MGMT-NSG \
-g TNSR-Resource-Group \
--priority 100 \
--access Allow \
--destination-port-ranges 22 \
--direction Inbound \
--protocol Tcp
8. Create the Management Network Interface.
$ az network nic create \
-g TNSR-Resource-Group \
--vnet-name TNSR-VNet \
--subnet TNSR-MGMT-Subnet \
-n TNSR-MGMT-nic \
--public-ip-address TNSR-MGMT-IP \
--network-security-group TNSR-MGMT-NSG
9. Create the WAN Network Interface.
$ az network nic create \
-g TNSR-Resource-Group \
--vnet-name TNSR-VNet \
--subnet TNSR-WAN-Subnet \
-n TNSR-WAN-nic \
--public-ip-address TNSR-WAN-IP \
(continues on next page)
1.2. Cloud Platforms 51
To Next Page
Loading...