Command with FXS Gateway
- 145 -
24.4.7 PPPoE (NAT) mode (1AFXS only)
Step 1. Set PPPoE mode, using [ifaddr]
usr/config$ ifaddr –mode 2 (PPPoE mode)
Step 2. Input the user id & password provided by your ISP, using [ifaddr]
usr/config$ ifaddr –id 123@hinet.net (PPPoE login account)
usr/config$ ifaddr –pwd 123 (PPPoE login Passowd)
Step 3. Reboot the device once after disconnection, using [ifaddr]
usr/config$ ifaddr –reboot 1 (Enable)
For example:
usr/config$ print