Product ManualXG-7100-1U
1.2.5 Switch Configuration Examples
Dedicated LAN switch
In this scenario, SFP+ port ix0 will be configured as the WAN interface. ETH1-8 will be configured as a LAN switch.
For this specific example, I’ll perform the WAN interface reassignment over console. Re-assigning the WAN can be
done from the webGUI as well.
This is what the default interface assignments look like on a XG-7100 without an addon NIC:
In this example, ix0 will be WAN, so select option 1 to re-assign WAN from lagg0.4090 to ix0:
1.2. XG-7100 Switch Overview 13
To Next Page
Loading...
