NETGEAR DGND3700 - Page 173

NETGEAR VPN Configuration
173
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
6. Configure the VPN Client Key Exchange Proposal.
In this step, you provide the type of encryption (DES or 3DES) to be used
for this
connection. This selection has to match your selection in the VPN router configuration.
a. Exp
and the Key Exchange subheading by double
-clicking its name or clicking the +
symbol. Then select Proposal 1 below Key Exchange.
b. In the SA Life drop-down list, select Unspecified.
c. In the Compression drop-down list, select None
.
d. Select the Encap
sulation Protocol (ESP) check box.
e. In the Encrypt Alg drop-down list, select the type of encryption. In this example, use
T
riple DES.
f. In the Hash Alg drop-down list, select S
HA-1.
g. In the Encapsulation drop-down list, select T
unnel.
h. Leave the Authentication Protocol (AH) check box cleared.
7.
Save the VPN client
settings.
From the File menu at the top of the Security Policy Editor window, select Save.
After you have configured and saved the VPN client information, your PC automatically
o
pens the VPN connection when you attempt to access any IP addresses in the range of
the remote VPN router’s LAN.
8. Check the VPN
conn
ection.