Virtual Private Networking
96
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
b. Click the Security Policy subheading to view the Security Policy settings.
Figure 44. Security Policy settings, Client-to-Gateway A
c. In the Select Phase 1 Negotiation Mode section of the screen, select the Main Mode
radio button.
4. Configure the VPN client identity.
In this
step, you provide information about the remo
te VPN client PC. You have to provide
the pre-shared key that you configured in the wireless modem router and either a fixed IP
address or a fixed virtual IP address of the VPN client PC.
a. In the Network Security Policy list on the lef
t side of the Security Policy Editor window,
click My Identity.
b. In the Select Certificate drop-down list, select None.
To Next Page
Loading...
