NETGEAR DGND3700 - Page 98

Virtual Private Networking
98
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
d. In the Encrypt Alg drop-down list, select the type of encryption that is configured for
the encryption protocol in the wireless modem router, as listed in Table 15 on
p
age 88. This example uses Triple DES.
e. In the Hash Al
g drop-down list, select SHA-1.
f. In the SA Life drop-down list,
select Unspecified.
g. In the Key Group
drop-down list, select Diffie-Hellman Group 2.
6. Configure the VPN client key exchange proposal.
In this step, you p
rovide the type of encryption (DES or 3DES) to be used for this
connect
ion. This selection has to match your selection in the wireless modem router
configuration.
a. Expand the Key Exchange subheading by double-clicking
its name or clicking the +
symbol. Then select Proposal 1 below Key Exchange.
b. In the SA Life drop-down list, select Unspecified.
c. In the Compre
ssion drop-down list, select None.
d. Select the Encapsulation Protocol (ESP) check
box.
e. In the Encrypt Alg dro
p-down list, select the type of encryption that is configured for
the encryption protocol in the wireless modem router, as listed in Table 15 on
p
age 88. This example uses Triple DES.
f. In the Hash Al
g drop-down list, select SHA-1.
g. In the Enca
psulation drop-down list, select Tunnel.
h. Leave the Authentication
Protocol (AH) check box cleared.
7. Save the VPN client settings.
In the
Security Policy Editor window, select File > Save
.
After you have configured and saved the VPN client information, your PC automatically
opens the VPN
connection when you attempt to access any IP addresses in the range of
the remote VPN router’s LAN.
8. Check the VPN connection.