Routing
316
M4300 Series and M4300-96X Fully Managed Switches User Manual
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> IPv6 > Advanced > Neighbor T
able.
6. Use the Search By field to search for IPv6 routes by IPv6 Address or Interface.
• T
o search by IPv6 address, select IPv6 Address from the Search By list. Enter the
128-byte hexadecimal IPv6 address in four-digit groups separated by colons, for
example, 2001:231F:::1.
Then click the Go button. If the address exists, that entry is
displayed. An exact match is required.
• T
o search by Interface, select Interface from the
Search By list, enter the interface
ID in unit/slot/port format, for example, 2/1/1. Then click the Go button. If the address
exists, that entry is displayed.
7. To refresh the page with the latest information on the switch, click the Update button.
8. To clear the IPv6 neighbors on a selected interface or on all interfaces, click the Clear
button.
The following table describes the nonconfigurable information that is displayed.
Table 114. IPv6 Advanced Neighbor Table
Field Description
Interface The interface whose settings are displayed in the current table row.
IPv6 Address The IPv6 address of the neighbor or interface.
MAC Address Specifies MAC address associated with an interface.
isRtr Indicates whether the neighbor is a router. If the neighbor is a router, the
value is T
rue. If the neighbor is not a router
, the value is False.
To Next Page
Loading...
