Reference Guide for the Model MR314 Cable/DSL Wireless Router
3-10 Preparing Your Network
3.
If an IP address appears under Router address, write down the address. This is the ISP’s
gateway address.
4.
If any Name Server addresses are shown, write down the addresses. These are your ISP’s DNS
addresses.
5.
If any information appears in the Search domains information box, write it down.
6.
Change the “Configure” setting to “Using DHCP Server”.
7.
Close the TCP/IP Control Panel.
Ready for Configuration
After configuring all of your PCs for TCP/IP networking and connecting them to the LOCAL
network of your Model MR314 router, you are ready to access and configure the router. Proceed to
the next chapter.
To Next Page
Loading...
