NETGEAR N450 WNR2500 - Back Panel

Hardware Setup
11
N450 Wireless Router WNR2500
Back Panel
The back panel has the following ports and connector:
LAN ports
Internet port
AC power connector
Figure 3. Back panel
Table 2. Back panel port and connector descriptions
Port or Connector Description
LAN ports Four local area networks (LAN) 10/100 Mbps Ethernet ports for connecting
the router to your local computers.
Internet port Ethernet port for connecting the router to a cable broadband modem or DSL
broadband modem.
The Internet port is also referred to as the W
AN port.
AC power connector AC power connector to connect the power adapter to the router.