NETGEAR N450 WNR2500 - Set up a Wireless Schedule

Advanced Settings
79
N450 Wireless Router WNR2500
IMPORTANT:
The Fragmentation Length, CTS/RTS Threshold, and Preamble
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
4. Click the Apply button.
Set Up a Wireless Schedule
You can use this feature to turn off the wireless signal from your router at times when you do
not need a wireless connection. For example, you could turn it off for the weekend if you
leave town.
 To configure and enable the wireless schedule:
1. Select ADVANCED >
Advanced Setup > Wireless Settings.
The Advanced Wireless Settings screen displays.
2. Click the Add a new period button.
The screen adjusts:
3. Use the lists, radio buttons, and check boxes to set up a period during which you want to
turn off the wireless signal.
4. Click the Apply button.
The Advanced Wireless Settings screen displays.