5G Mobile Hotspots
QUICK START
To charge the battery, connect the USB cable to the mobile
hotspot, then plug it into a wall socket using the AC power
adapter or a computer USB port.
Make sure that your nano SIM card matches the orientation
shown on the device label and gently insert it, then install
the battery and back cover.
NOTE: Only use your ngers to insert or remove the nano
SIM card. Using other objects might damage your device.
1. GET TO KNOW YOUR DEVICE 2. INSTALL THE SIM AND BATTERY
Your mobile hotspot comes packaged with the following
components:
• Nighthawk® M6 or M6 Pro 5G Mobile Hotspot*
• Battery cover
• Battery
• USB Type-C cable
• Power adapter
*Nighthawk M6 model shown for illustrative purposes.
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference
purposes only.
June 2023
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 6, Penrose Two,
Penrose Dock, Cork,
T23 YY09, Ireland
To use your mobile hotspot, you need a
valid, activated nano SIM card and a data
plan from your mobile provider. For more
information, scan the QR code or visit
netgear.com/mobile-setup.
For more detailed information about
setting up and using your mobile
hotspot, scan the QR code to download
the Nighthawk M6 user manual or visit
netgear.com/m6usermanual.
Nano SIM card
Battery
Battery cover
Power button
Touch
screen
Home
Back
External
antenna
port (TS-9)
External
antenna
port (TS-9)
USB
Type-C
port
Ethernet
port
To Next Page
Need help?
General
Weight and Dimensions
