NETGEAR Nighthawk Pro Gaming XR500 - Attach the Antennas

Attach the Antennas
The router comes with four antennas. Attach two antennas to the rear panel and attach
one antenna to each side panel.
Figure 4. Attach the antennas and position them for best WiFi performance
To attach the antennas:
1. Align the antennas with the antenna posts on the router.
2. Attach the antennas on the threaded antenna posts.
3.
Position the antennas for the best WiFi performance.
We recommend that you position all of the antennas as shown in the previous figure.
Position the antennas on the rear panel vertically and position the antennas on the
side panels at a 45 degree angle.
User Manual15Hardware Setup
XR500 Nighthawk Pro Gaming Router