USB Device Requirements
The router works with most USB-compliant external flash and hard drives. For the most up-to-date list of USB devices
that the router supports, visit kbserver.netgear.com/readyshare.
Some USB external hard drives and flash drives require you to load the drivers onto the computer before the computer
can access the USB device. Such USB devices do not work with the router.
The router supports the following file system types for full read/write access:
• FAT16
• FAT32
• NTFS
• NTFS with compression format enabled
• Ext2
• Ext3
• Ext4
• HFS
• HFS+
Connect a Storage Device to the Router
ReadySHARE lets you access and share USB and eSATA devices that are connected to the appopriate router port.
(If your USB device uses special drivers, it is not compatible.)
Figure 9. USB 3.0 and an eSATA port are located on the sides of the router
Share USB Storage Devices Attached to the Router
98
Nighthawk X4S AC2600 Smart WiFi Router
To Next Page
Loading...
