4
Connect to the Extender Network
After you complete the setup process, you can connect all your devices to
the new extender network using a WiFi, wired, or WPS connection.
WiFi connection
Note: If you enabled the One WiFi Name feature, your extender uses the
the same WiFi network name and password as your router.
¾ To connect to the extender WiFi network:
1. On your WiFi-enabled computer or mobile device, open the WiFi
connection manager that manages your WiFi connections.
The WiFi connection manager scans for WiFi networks in your area.
2. Find and select your extender’s WiFi network name (SSID) and enter
your extender’s WiFi password.
This is the SSID and password that you set up during the installation
process. If you enabled the One WiFi Name feature, use your router’s
SSID and password.
To Next Page
Loading...
