You can set up a link aggregation connection between the satellite and a switch by
doing the following:
1. On the switch, configure either static link aggregation or Link Aggregation Control
Protocol (LACP) on the two Ethernet ports that you intend to use for the LAG
connection to the satellite.
CAUTION: To prevent a network loop, configure the switch ports before connecting
them to the satellite ports.
2. Connect the two Ethernet ports on the switch to the LAN 1 and LAN 2 ports on the
satellite.
User Manual29Manage Your Orbi Pro Ceiling
Satellite
Orbi Pro Ceiling Satellite
To Next Page
Loading...
