3
Contents
Chapter 1 Get Started
Supported Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Configure the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Access the Switch Using a Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Access a Switch That Is Off-Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Access a Switch That Is Connected to a Network . . . . . . . . . . . . . . . . . . . . . . . 8
Access the Switch With the ProSAFE Plus Configuration Utility . . . . . . . . . . . . . 9
Install the ProSAFE Plus Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Access and Configure the Switch Using the ProSAFE Plus Utility . . . . . . . . . . 9
Change the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Use Browser-Based Access to Change the Password . . . . . . . . . . . . . . . . . . . 11
Use the ProSAFE Plus Utility to Change the Password . . . . . . . . . . . . . . . . . . 11
Chapter 2 Manage Network Settings
Specify IP Address Settings for the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Use Browser-Based Access to Specify the Switch IP Address. . . . . . . . . . . . 14
Use the ProSAFE Plus Utility to Specify the Switch IP Address . . . . . . . . . . . 15
Manage Multicast Traffic With IGMP Snooping . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Use Browser-Based Access to Customize IGMP Snooping. . . . . . . . . . . . . . . 16
Use the ProSAFE Plus Utility to Customize IGMP Snooping . . . . . . . . . . . . . . 17
Use Browser-Based Access to Specify a VLAN for IGMP Snooping . . . . . . . 19
Use the ProSAFE Plus Utility to Specify a VLAN for IGMP Snooping . . . . . . 20
Set Up Static Link Aggregation Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Use Browser-Based Access to Specify LAG Membership and
Enable LAGs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Use the ProSAFE Plus Utility Specify LAG Membership and
Enable LAGs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Chapter 3 Optimize Performance With Quality of Service
Enable 802.1p/DSCP-Based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . 26
Use Browser-Based Access to Enable 802.1p/DSCP-Based QoS . . . . . . . . 26
Use the ProSAFE Plus Utility to Enable 802.1p/DSCP-Based QoS. . . . . . . . 27
Configure Port-Based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Use Browser-Based Access to Configure Port-Based QoS . . . . . . . . . . . . . . 28
Use the ProSAFE Plus Utility to Configure Port-Based QoS. . . . . . . . . . . . . . 29
Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Use Browser-Based Access to Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . . 31
Use the ProSAFE Plus Utility to Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . 32
Set Up Broadcast Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To Next Page
Loading...
Need help?
General