NETGEAR ProSAFE SRX5308 - Page 62

Net Mode Configuration Commands
62
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
net lan dhcp reserved_ip delete <mac address>
This command deletes the binding of a MAC address to an IP address.
Related show commands: show net lan dhcp reserved_ip setup and show net lan dhcp
leased_clients list
net lan lan_groups edit <row id> <new group name>
This command specified an IPv4 LAN group name, that is, it changes a default group name
such as Group1, Group2, or Group3. You need to specify both the row id that represents the
group (for example, 2 for Group2, or 5 for Group5) and the new name for the group.
Related show command: show net lan lan_groups
net lan ipv4 multi_homing add
This command configures a new IPv4 alias, that is, a secondary IPv4 address. After you have
issued the net lan ipv4 multi_homing add command, you enter the
net-config [lan-ipv4-multihoming] mode, and then you can configure the secondary address
and subnet mask in the order that you prefer.
Format net lan dhcp reserved_ip delete <mac address>
Mode net
Format net lan lan_group edit <row id> <new group name>
Mode net
Step 1 Format net lan ipv4 multi_homing add
Mode net
Step 2 Format ip_address <ipaddress>
subnet_mask <subnet mask>
Mode net-config [lan-ipv4-multihoming]
Keyword Associated Param-
eter to Type
Description
ip_address ipaddress The secondary IPv4 address for the LAN.
subnet_mask subnet mask The subnet mask for the secondary IPv4 address.