Chapter 2: Diagnostics and Maintenance | 23
ReadyNAS 3100 Hardware Manual
The system will do the following:
a. Blink both LEDs twice to confirm the selection.
b. Proceed with clearing the disks.
c. Power down.
5. Power on the system.
The system will do the following:
a. Reboot.
b. Perform disk diagnostics.
The disks will now need to be formatted.
6. Run the RAIDar utility. RAIDar will prompt you to click Setup
7. Click Setup to display the ReadyNAS Volume Setup screen.
To Next Page
Loading...