Specify Network Settings
73
VDSL Voice Gateway
• The Destination IP Address and IP Subnet Mask fields specify that this static route
applies to all 134.177.x.x addresses.
• The Gateway IP
Address field specifies that all traffic for these addresses should be
forwarded to the ISDN gateway at 192.168.1.100.
• A metric value of 1 works because the ISDN gateway is on the LAN.
• Private is selected only as a precautionary security measure in case RIP is activated.
Set Up a Static Route
To set up a static route:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Advanced Setup > Static Routes.
5. Click the Add button.
The screen adjusts:
6. In the Route Name field, type a name for this static route (for identification purposes only).
7. T
o limit access to the LAN only, select the Private check box.
If you select Private, the static route is not reported in RIP.
8. T
o make this route effective, select the Active check box.
By default, the Active check box is selected.
9. T
ype the IP address of the final destination.
10. T
ype the IP subnet mask for this destination. If the destination is a single host, type
255.255.255.255.
To Next Page
Loading...
