NETGEAR VEVG2660-1TKSAS - Change the admin Password

Manage Your Network
90
VDSL Voice Gateway
Erase the Current Configuration Settings
You can erase the current configuration and restore the factory default settings. You might
want to do this if you move the gateway to a different network. (For more information, see
Factory Settings on page 114.)
 To erase the configuration settings:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Backup Settings.
5. Click the Erase button.
The factory default settings are restored. The user name is admin, the password is password,
and the LAN IP address is 10.0.0.2. DHCP is enabled.
Change the admin Password
You can change the default password that is used to log in to the gateway with the user name
admin. This password is not the one that you use for WiFi access. The product label shows
your unique wireless network name (SSID) and password for wireless access.
 To set the password for the user name admin:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://www.routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.