NETGEAR VEVG2660-1TKSAS - Set up Password Recovery for Admin

Manage Your Network
91
VDSL Voice Gateway
4. Select ADVANCED > Administration > Set Password.
5. Type the old password, and type the new password twice.
6. T
o be able to recover the password, select the Enable Password Recovery check box.
NETGEAR recommends that you enable password recovery.
7. Click the Apply button.
Your changes are saved.
Set Up Password Recovery for admin
Best practice is to enable password recovery if you change the password for the gateway
user name admin. Then you can recover the password if it is forgotten. This recovery process
is supported in Internet Explorer, Firefox, and Chrome browsers, but not in the Safari
browser.
 To set up password recovery:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. T
ype http://www.routerlogin.net or http://10.0.0.2.
A login screen displays.
3. Enter the gateway user name and password.
The user name is admin. The
default password is admin. The user name and password
are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Administration > Set Password.
The Set Password screen displays.
5. Select the Enable Password Recovery check box.
6. Select two security questions and provide answers to them.
7. Click the Apply button.
Your changes are saved.