Reference Manual for the 108 Mbps Wireless Media Router WGT634U
7-2 Maintenance
April 2004, 202-10018-02
This screen shows the following parameters:
Table 7-1. Menu 3.2 - Wireless Router Status Fields
Field Description
Account Name Displays the Host Name assigned to the router.
Firmware Version Displays the router firmware version.
Internet Port These parameters apply to the Internet (WAN) port of the router.
MAC Address Displays the Media Access Control address being used by the Internet
(WAN) port of the router.
IP Address Displays the IP address being used by the Internet (WAN) port of the
router. If no address is shown, the router cannot connect to the Internet.
DHCP If set to None, the router is configured to use a fixed IP address on the
WAN. If set to Client, the router is configured to obtain an IP address
dynamically from the ISP.
IP Subnet Mask Displays the IP Subnet Mask being used by the Internet (WAN) port of
the router.
Domain Name Server Displays the Domain Name Servers (DNS) mapping descriptive names
of network resources to IP addresses.
LAN Port These parameters apply to the Local (WAN) port of the router.
MAC Address Displays the Media Access Control address being used by the LAN port
of the router.
IP Address Displays the IP address being used by the Local (LAN) port of the router.
The default is 192.168.1.1
DHCP Identifies if the router’s built-in DHCP server is active for the LAN
attached devices.
IP Subnet Mask Displays the IP Subnet Mask being used by the Local (LAN) port of the
router. The default is 255.255.255.0
Wireless Port These parameters apply to the Wireless port of the router.
Name (SSID) Displays the wireless network name (SSID) being used by the wireless
port of the router. The default is Wireless.
Region Displays the geographic region where the router is being used.
Channel Identifies if the channel the wireless port is using. See “Wireless
Channels” on page D-7 for the frequencies used on each channel.
Mode Indicates the current mode — g and b, g only, or b only.
Broadcast Name Indicates whether the router is broadcasting its SSID.
To Next Page
Loading...
