Reference Manual for the 108 Mbps Wireless Media Router WGT634U
7-8 Maintenance
April 2004, 202-10018-02
5.
Wait for the router to reboot. This may take up to 3 minutes.
6. Verify that the router firmware has been upgraded by viewing the screen discussed in
“Viewing Wireless Router Status Information” on page 7-1.
7. Reset router to factory defaults. This step will erase all the existing configuration settings.
8. Wait for the router to reboot. This may take up to 3 minutes.
9. Using the instructions at “Backing Up and Restoring the Configuration” on page 7-9, restore
the settings you backed up down before upgrading.
Configuration File Management
The configuration settings of the WGT634U Wireless Media Router are stored within the router in
a configuration file. This file can be saved (backed up) to a user’s PC, retrieved (restored) from the
user’s PC, or cleared to the factory default settings.
From the main menu of the browser interface, under the Maintenance heading, select the Settings
Backup heading to bring up the menu shown below.
Figure 7-7: Settings Backup menu
Three options are available, and are described in the following sections.
To Next Page
Loading...
