Chapter 2. Powerline Utility | 19
Powerline AV+ 200 Adapter Kit XAVB1501
4. To set the traffic prioritization rule for the selected Powerline AV Ethernet Adapter device,
click Priority and specify the priority in the QoS Setup section of the screen.
5. If applicable, select the VLAN tag or TOS field check box.
These options apply only to QoS-configured networks. IEEE 802.1p uses prioritization
bits in Layer-2 frames. Type of Service (ToS) routing uses prioritization bits in Layer-3 IP
packets. The deprecated ToS values range from 0 to 7.
6. Click Apply.
To Next Page
Loading...
