•
Static IP 1 & 2 - shows each static IP address that iViewHD will respond to. A value of 0.0.0.0
means that no Static IP address has been configured.
•
System Events - These are internal events that iViewHD logs. If you are experiencing prob-
lems, technical support may ask you for these values to assist in isolating the problem.
Any changes that are made to iViewHD parameters are saved in persistent storage. Most changes to
iViewHD parameters force iViewHD to restart, so you should be careful not to change these parame-
ters while there are other network connections to iViewHD or else these connections will be lost. You
should also be careful when changing things such as IP addresses and or the device name, because
you may need to locate the camera on the network again using Bonjour.
iViewHD Userʼs Manual
20 © 2009 NetMedia, Inc.
To Next Page
Loading...