Netopia 3346N-ENT Installation Guide

Netopia 3366C-ENT with Dial Back Up
1. Remove from the shipping carton
a. Netopia Router
b. Lavender RJ-11 Telephone Cable
c. Yellow RJ-45 Ethernet Cable
d. Power Supply
2. Insert one end of the lavender RJ-11 telephone cable into
the DSL port on the routers back panel
3. Insert the other end of the lavender RJ-11 telephone cable
into the wall jack that supports your DSL.
4. Insert one end of the yellow RJ-45 Ethernet cable into
the LAN 1 port on the routers back panel
5. Insert the other end of the yellow RJ-45 Ethernet cable
into the network port on the back of your computer or
POS machine
1. The power light on the front of the router will
light solid green when the unit has power
2. The DSL SYNC light will flash green when connecting
with the DSLam. Solid green when connected to the
DSLam. Flashes green when DSL traffic is running
over the router.
3. LAN 1,2,3,4 will be solid green when connected to
each port on the LAN. Flash green when there is activity on each port.
4. The Dial up light will flash green when dialing. . Solid green when connected to the internet.
Flashes green when Dial Up traffic is running over the router.
2
1
2
3
4
2

Netopia 3346N-ENT Specifications

General

Brand	Netopia
Model	3346N-ENT
Category	Network Router
Language	English