Netro SPRITE - Setup; Reattach Base Cover; Power On and LED Status; Host Network Mode

Plug in the power. the LED light will flash
once and be off. Wait for 1 minute, the light
will be back on and after another 45 seconds
it will be blinking slowly (once every second).
If the light is stable or blinking fast (twice
every second), press the RST button.
-6-
Put the front cover back on the base.
Tip:
Search for "Netro sprite watering"
on Google Play and App Store.
The network of your Sprite will be in its HOST mode
(you will see a WiFi network named “Netro_IRC_xxx").
Download the free Netro app
and start to configure.
Setup
5
6
7
8