FOREWORD
Appropriate service methods and correct repair procedures are essential for the safe, reliable
operation of all equipment as well as the personal safety of the individual performing the repair.
This Repair Manual provides fault finding, overhaul and pressure testing instructions using
recommended procedures and equipment. Following these instructions will ensure the safe,
efficient and timely completion of the service or repair. Anyone who departs from these
instructions should be aware that they do so at the risk of compromising their own personal
safety and the safety of others.
Throughout this Manual you will see text
in
italics, preceded by the words NOTE, IMPORTANT
or WARNING. Such text has the following significance.
NOTE: This text stresses a correct operating procedure
or
technique.
IMPORTANT: This text stresses a correct operating technique
or
procedure that,
if
ignored,
could result in damage to the tractor
or
equipment.
A WARNING: This text stresses a correct operating technique
or
procedure that,
if
.a
ignored, could result in personal injury
or
death
to
the Operator
or
bystanders.
The Manual is divided into Parts, each sub-divided in turn into Chapters. Each Chapter
contains.information on general operating principles, detailed inspection, overhaul and where
applicable, specific trouble shooting, special tools and specifications. Any reference
in
this
Manual to right, left, rear, front, top or bottom, is as viewed from the Operator's seat, looking
forward.
All data and illustrations
in
this Manual are subject to variations in build specification. This
information was correct at the time of issue, but Ford New Holland policy is one of continuous
improvement and the right to change specifications, equipment
or
design at any time, without
notice, is reserved.
Find manuals at https://best-manuals.com
To Next Page
Loading...
