New Holland E37C - Accessories; Direct Fit Buckets

9-ACCESSORIES
9-ACCESSORIES###_10_###
Directtbuckets
Thedataarereferredforworkingoperationwiththedozerbladeupand400kg(882lb)counterweight.
Forcabconguration:
•
1.30m(51.18in)arm,minimumliftvalue:370kg(815.71lb).
•
1.60m(62.99in)arm,minimumliftvalue:340kg(749.57lb).
Forcanopyconguration:
•
1.30m(51.18in)arm,minimumliftvalue:350kg(771.62lb).
•
1.60m(62.99in)arm,minimumliftvalue:320kg(705.48lb).
Directtbucketsapplicationasfunctionofthearm(forcabversion)
Generalpurposebuckets
Arm
Capacity
ISO7451(Heaped)
WidthMass
1.30m
(51.18in)
1.60m
(62.99in)
0.060m³(0.078yd³)305mm(12.01in)73kg(160.94lb)
●
●
0.090m³(0.118yd³)457mm(17.99in)93kg(205.03lb)
●
●
0.120m³(0.157yd³)610mm(24.02in)112kg(246.92lb)
●
●
0.188m³(0.246yd³)914mm(35.98in)150kg(330.69lb)♦(**)♦(**)
Directtbucketsapplicationasfunctionofthearm(forcanopyversion)
Generalpurposebuckets
Arm
Capacity
ISO7451(Heaped)
WidthMass
1.30m
(51.18in)
1.60m
(62.99in)
0.060m³(0.078yd³)305mm(12.01in)73kg(160.94lb)
●
●
0.090m³(0.118yd³)457mm(17.99in)93kg(205.03lb)
●
●
0.120m³(0.157yd³)610mm(24.02in)112kg(246.92lb)
●
●
0.188m³(0.246yd³)914mm(35.98in)150kg(330.69lb)♦(**)Notapplicable
●Densityofmaterialupto1.6t/m
3
▲Densityofmaterialfrom1.4t/m
3
to1.6t/m
3
■Densityofmaterialfrom1.2t/m
3
to1.4t/m
3
♦Densityofmaterialunder1.2t/m
3
(*)Withthisbucket,toimprovediggingperformanceandstabilityitisrecommendedtouseadditionalcounterweight.
(**)Withthisbucket,toimprovediggingperformanceandstabilityitismandatorytouseadditionalcounterweight.
NOTICE:makeparticularattentionwhenswingtheboomtotheleft-handside:theattachmentmaycollidewiththe
cab/canopy.
9-1