New Holland Lx985 - Metric Hardware Torque Specifications

SECTION 1 - GENERAL INFORMATION
MINIMUM HARDWARE TIGHTENING TORQUES
IN FOOT POUNDS (NEWTON-METERS) FOR NORMAL ASSEMBLY APPLICATIONS
METRIC HARDWARE AND LOCKNUTS
NOMINAL
CLASSS.8
CLASS8.8 CLASS 10.9
SIZE
UNPLATED PLATED
UNPLATED PLATED UNPLATED PLATED
W/ZnCr
W/ZnCr W/ZnCr
M4
15*(1.7) 19* (2.2) 23* (2.6) 30* (3.4) 33* (3.7) 42* (4.8)
M6
51* (5.8) 67* (7.6) 79* (8.9)
102* (12) 115* (13) 150* (17)
M8 124* (14) 159* (18)
195* (22) 248* (28) 274* (31) 354* (40)
M10
21 (28) 27 (36) 32 (43)
41 (56) 45 (61) 58 (79)
M12 36 (49)
46 (63) 55 (75) 72 (97) 79 (107) 102 (138)
M16
89 (121) 117 (158) 137 (186)
177 (240) 196 (266) 254 (344)
M20 175 (237)
226 (307) 277 (375) 358 (485) 383 (519) 495 (671)
M24 303 (411)
392 (531) 478 (648) 619 (839) 662 (897) 855 (1160)
NOTE: Torque values shown with * are inch pounds.
IDENTIFICATION
HEX CAP SCREW AND CARRIAGE BOLTS
CLASSES 5.6 AND UP
MANUFACTURER'S IDENTIFICATION
A ■
CD
PROPERTY CLASS
HEX NUTS AND LOCKNUT$
CLASSES 05 AND
UP
MANUFACTURER'S IDENTIFICATION
PROPERTY CLASS CLOCK MARKING
1-16
LOCKNUT
CL.8
W/CL8.8
BOLT
16* (1.8)
56* (6.3)
133* (15)
22 (30)
39 (53)
97 (131)
195 (265)
338 (458)