New Holland T8.390 User Manual

Part number 47533593
2
nd
edition English
October 2013
SERVICE MANUAL
T8.275 / T8.300 / T8.330 /
T8.360 / T8.390 / T8.420
Continuously Variable Transmission (CVT)
Tractor
PIN ZCRC02586 and above
PrintedinU.S.A.
Copyright © 2013 CNH America LLC. All Rights Reserved. NewHollandisaregisteredtrademarkofCNH America LLC.
Racine Wisconsin 53404 U.S.A.

New Holland T8.390 Specifications

General

Brand	New Holland
Model	T8.390
Category	Tractor
Language	English

Summary

INTRODUCTION

Foreword - Important notice regarding equipment servicing

Provides important notices and guidelines for equipment servicing.

Safety rules

General maintenance safety

Specific safety rules for performing maintenance on the tractor.

Personal Protective Equipment (PPE)

Mandatory personal protective equipment required during tractor operation and maintenance.

Do Not Operate tag

Guidance on using 'Do Not Operate' tags to ensure safety during servicing.

Ecology and the environment

Recommendations for environmentally safe handling and disposal of fluids and materials.

Torque

Minimum tightening torques for normal assembly

Specifications for minimum tightening torques for standard hardware assembly.

Capacities

Product identification

Tractor model and product identification number

Instructions for identifying tractor model and serial numbers for parts and service.

Roll Over Protective System (ROPS) serial number

Information on locating the ROPS serial number on the tractor.

Engine

Engine and crankcase

Detailed instructions for removing and installing engine and crankcase components.

Cylinder heads

Procedures for removing and installing cylinder heads and related components.