SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--16
STEERING COLUMN ADJUSTMENT --
Fig. 32
The steering is fitted with a lever for tilt adjustment.
To adjust the steering wheel, use lever (1) fig. 32.
When adjusted satisfactorily, lock the lever by
pushing it upwards.
1. Steering wheel tilt adjustment
-- Lever down, steering column released;
-- Lever up, steering column locked in position.
1
TRE0010A
32
SEATS
Even under difficult conditions, adjust your seat for
safe driving. To avoid danger, follow the instructions
below:
-- do not adjust the seat when the tractor is moving;
-- the driver’s seat must be fitted and repaired by
specialist personnel only.
-- check periodically that the securing screws are
tight and that the adjustment controls are
working properly to ensure safety and stability
when working.
Standard seat -- Fig. 33
The driver’s seat has adjusters for its suspension,
height and distance from the controls.
You can therefore select the most suitable position
for driving, and even change it while working.
-- To move the seat forward or back, pull the lever
(1) sideways.
-- After moving the seat, release the lever, ensuring
that the seat is locked in the chosen position.
1
TRE0056A
33
To Next Page
Loading...
