14 SECTION 18 − CLUTCH − CHAPTER 1
603.54.471.00 − 11 − 2004
OVERHAUL
The clutch is removed, refitted and adjusted with the
universal outfit 293650.
Parts of the universal outfit 293650 Necessary
to adjust the VALEO clutch.
A. Plate 293332.
B. Central spacer
293728. ∅ 35mm (1.3779 in.) for 11”/11” clutch
293729. ∅ 40mm (1.5748 in.) for 12”/12” clutch
C. Gauge 293731.
D. Locknut 293730 for central spacer.
E. Side spacers 293726.
F. Studs 293725.
I. Blocks.
L. Handwheel 293739 securing the gauge.
M. Handwheels 293740 securing the side spacers.
N. Spacers for studs.
MDH1883A
27
Note − Before fitting the clutch on the outfit 293650
it is advisable to remove the three bolts retaining the
flexible tabs that drive the PTO clutch pressure plate
ring from the supporting housing.
28
To Next Page
Loading...
