5
SECTION 21 -- TRANSMISSIONS -- CHAPTER 1
603.54.471.00 -- 11 -- 2004
5
Longitudinal cutaway section through gearbox and range gear.
1. Power take--off (PTO) shaft support bushing.
2. Seal.
3. Gearbox driving shaft.
4. PTO shaft.
5. Driving shaft adjustment ring.
6. Range gear driving shaft.
7. Control gear for reverse and middle speeds.
8. Upper cover.
9. Driving gear for middle speeds.
10. Bevel pinion shaft.
11. Retaining half--rings.
12. Driven gear for reverse speeds.
13. Driven gear for low speeds.
14. Selector sleeve for high and low speeds.
15. Circlip.
16. Synchroniser for 1
st
and 2
nd
speeds.
17. Support bushings for gearbox driven gears.
18. Synchroniser for 3
rd
and 4
th
speeds.
19. Gearbox driven shaft.
NOTE -- On assembly apply sealant to surfaces X following the indications given on page 6 in this Section.
To Next Page
Loading...
