New Holland TD60D - Sectional Drawings of Transmission - Gearbox Case

7
SECTION 27 -- REAR AXLE AND TRANSMISSION -- CHAPTER 1
603.54.471.00 -- 11 -- 2004
5
TRE0551A
Sectional drawings of transmission--gearbox case
1. Mid--range and reverse gear control rod.
2. Slow and fast gear control rod.
3. 1st and 2nd gear control rod.
4. Detent balls.
5. Spring for ball (4).
6. Gear engagement safety pawl.
7. Spring for ball (8).
8. Detent ball.
9. 3rd and 4th gear control rod.
10. PTO external control lever.
11. Gear engagement safety pawl.
12. Plug.
13. Range engagement safety pawl.
14. Plug.
15. Reverse gear support pin.
16. Retaining bolt.
17. Reverse idler gear.
18. Thrust bearing.
19. Snap ring.
20. PTO shaft.
21. Reverser drive shaft.
22. Engagement gear for mid--range and reverse
gears.
23. Driving gear for mid--range gears.
24. Snap ring.
NOTE: Screw in plugs 12 and 14 using one of the sealing compounds listed on page 1, Section 00.