New Holland TD60D - Sectional Diagrams of Single- and 2-Speed PTO

5
SECTION 31 -- POWER TAKE--OFF -- CHAPTER 1
603.54.471.00 -- 11 -- 2004
2
26278
1 2
3
4
5
6
7
8
9
10
11
1213
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
a -- single--speed 540 rev/min PTO b -- 2--speed 540/750 rev/min PTO
X
X
Sectional diagrams of single-- and 2-- speed PTO
a. Sectional diagram of single--speed PTO.
b. Sectional diagram of 2--speed PTO.
1. 540 rev/min PTO cover.
2. 540/750 rev/min PTO cover.
3. PTO unit fixing screw .
4. Drive shaft bearings.
6. Self--locking nut to secure splined shaft.
7. 540 rev/min splined shaft.
8. 750 rev/min splined shaft.
9. Seal.
10. Driven shaft bearings.
11. Cover locating pin.
12. Rear transmission casing.
13. Rear transmission support.
14. Driven gear.
15, 27, 28, 16 and 5. Snap rings.
17. PTO guard retaining screws.
18. 540 rev/min PTO driven shaft
19. Driven gear support bushings.
20. Driven shaft lock nut.
21. Fixed gear.
22. Coupling sleeve.
23. Driven gear for 750 rev/min speed.
24. Driven gear for 540 rev/min speed.
25. Double drive gear.
26. Drive gear.
NOTE: When installing use sealing compound of the type shown on page 1 section 00 on surface X as shown above.