New Holland TD60D - Control Levers, Seat, Electrical Controls Disassembly and Assembly

2
SECTION 90 -- CAB -- CHAPTER 1
603.54.471.00 -- 11 -- 2004
1
CONTROL LEVERS, SEAT,
ELECTRICAL CONTROLS
Disassembly--Assembly
(Op. 90 160 43--90 160 42--90 120 10)
1. Disconnect the negative cable from the battery.
1
TRE0247A
2
2. Take out the four securing screws (1) and re-
move the covering of the control panel.
3. Disconnect the electrical connector from the cab
interior light switches (3) and remove the cover.
3
1
2
TRE0042A
3
4. Remove the LH panel retaining screws (1).
1
TRE0006B
4
5. Remove the three LH panel retaining screws (1).
1
TRE0146A