PROVEN LINKAGE CONTROL
All Series TDD Plus tractors feature
New Holland’s proven Flexion Bar™ lower
link draft sensing. The system is simple to
operate.
It incorporates the Lift-O-Matic™ rear
linkage control, which can be set by the
operator to raise and lower an implement
to pre-set heights via a single control, as
standard. This reduces the number of
operations that need to be made when
turning at the end of the field and also
ensures preset lift and lower heights are
maintained.
EffICIENT AND EASY TO USE
TDD tractors have a direct drive PTO
system. This reduces power losses and
the number of wearing parts within the
transmission.
Operated by a simple hand lever, the
PTO clutch allows the operator to feed
power to a driven implement gradually.
This reduces wear and tear.
PTO speeds available include ground
speed, 540/540E or 540/1000rpm.
MORE fLOW, GREATER CONTROL
All TDD models have independent power
steering and hydraulic service pumps. This
ensures full hydraulic power is always
available especially for demanding
applications such as front end loader work.
To Next Page
Loading...
Need help?
General
