New Holland TDD PLUS TD80D PLUS - Page 15

MODELS TD60D Plus TD70D Plus TD80DPlus TD90D Plus TD95D Plus
Dimensions**
A Overall length 2WD / 4WD (mm) 3933 / 3933 3933 / 3933 4032 / 3976 4032 / 3976 4115 / 4059
B Minimum width (mm) 1808 1808 1808 1808 1808
C Height at centre of rear axle to top of
Cab / ROPS (mm) 1875 / 1896 1875 / 1896 1878 / 1896 1878 / 1896 1878 / 1896
D Total height Cab / ROPS (mm) 2550 / 2570 2550 / 2570 2540 / 2558 2566 / 2584 2618 / 2636
E Wheelbase 2WD / 4WD 2175 / 2119 2175 / 2119 2305 / 2249 2305 / 2249 2388 / 2332
F Track width
Front 2WD (mm) 1410 - 1910 1410 - 1910 1410 - 1910 1410 - 1910 1410 - 1910
Front 4WD (mm) 1445 - 1875 1445 - 1875 1550 - 1980 1550 - 1980 1550 - 1980
Rear Min. / Max. (all axle types) (mm) 1425 - 1925 1425 - 1925 1420 - 2025 1420 - 2025 1420 - 2025
G Ground clearance under drawbar
2WD / 4WD (mm) 285 / 292 285 / 292 285 / 292 346 / 333 390 / 375
Weights**
Minimum weight cab 2WD / 4WD (kg) 2840 / 3080 2840 / 3080 3170 / 3600 3170 / 3600 3340 / 3770
Minimum weight ROPS 2WD / 4WD (kg) 2650 / 2920 2650 / 2920 2940 / 3420 2940 / 3420 3150 / 3580
Max. permissible weight on the front axle
2WD / 4WD (kg) 2400 / 2650 2400 / 2650 2000 / 2800 2000 / 2800 2000 / 2800
Max. permissible weight on the
rear axle (kg) 4000 4000 4000 4000 4000
* New Holland Engine developed by FPT - Fiat Powertrain Technologies ** National restrictions apply.
●Standard OOptional at extra cost – Not available
D
C
Ef
AB
G