miniStack V3
External Storage Solution for the Mac mini
Includes built in FireWire & USB Hubs
Once you have the FireWire and USB interconnect cables hooked
up, plug the miniStack into the power transformer and turn the
drive on using the power switch on the back of the enclosure.
The miniStack will power on automatically with the Mac mini
- no need to turn the enclosure on and o by itself. NOTE: if
you are connecting via eSATA, the drive must be attached and
powered on at the time of system startup. eSATA is not hot
swappable.
Your miniStack comes preformatted using the latest version
of Mac OS X and is also loaded with a selection of shareware,
freeware, and Apple system updates. Feel free to browse the
contents - enjoy!
To unmount your Newer Technology miniStack, simply drag
it’s icon to the eject icon (the trash can changes to the eject
icon) in the dock. Your miniStack can safely be disconnected
- but remember any attached
FireWire or USB devices will lose
connectivity as well when you
turn it o.
Every storage solution that Newer Technology makes is ready to
use with Apple’s Time Machine, a built in backup feature of Mac
OS 10.5 “Leopard”.
The NewerTechnology miniStack includes ProSoft Data Backup 3
and Intech Hard Disk SpeedTools. To install and use either piece
of software, please consult the user guides/instruction manuals
on the CD.
NWTMANFWU2MSV3
Copyright ®2005 Newer Technology, Inc. All Rights Reserved. Newer Technology’s 2 year Limited Warranty is not transferrable and is subject to limitations.
To Next Page
Need help?
General
