EasyManua.ls Logo

Newer Technology Power2U - Page 2

Default Icon
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation and use:
TheinstallationoftheNewerTechnologyPower2Ureceptacleisstraightfowardandthesameasreplacinganormalelectrical
receptacle.ThePower2Uisalargedevice;makecertainthatyourelectricalboxcanlegallyaccomodateit!
To install the Newer Technology Power2U:
TurnthepowerOFFtothereceptacleyouarereplacing.Thisisdoneattheelecricalcircuitbreakerboxorthefusebox.
TurnthecircuitbreakerOFForremovethefusethatpowersthecircuityouareworkingonbeforeproceeding!
ConnectthewirestotheNewerTechnologyPower2Ubyplacingthewireintotheslotofthesteelpressureplate,tighten
thescrewto14inch-poundsoftorque,thenbendthewire90ºsothatitisatagainstthePower2U’sbody.
•Theblackwireconnectstothebrassterminal(HOT)
•Thewhitewireconnectstothesilverterminal(NEUTRAL)
•Thebarecopperorgreenwireconnectstothegreenterminal(GROUND)
Wire(12or14AWG)
outgoingpowertonext
receptacle(ifavailable)
Wire(12or14AWG)
incomingpower
Groundingconnection
tobox
WireNut
BlackWire WhiteWire
Insertblackwireintosloton
steelscrewplate
Insertwhitewireintosloton
steelscrewplate
Insertbareorgreenwire
intoslotonsteelscrewplate
DeviceScrews
FaceplateScrews Faceplate
ScrewCovers
Foldthewiresintotheelectricalbox,keepingthebaregroundwireawayfromtheHOT(brass)andNeutral
(silver)terminals.ScrewthePower2Uintotheelectricalbox.ScrewthefaceplateintothePower2Uandcoverthefaceplate
screwsusingtheincludedplasticcovers.
Turnthepowerbackontothereceptacleatthecircuitbreakerorfusepanel.TestthePower2Ureceptacle(125V)power
outletsandthe5.2VUSBoutletstoverifyproperoperation.TheUSBoutletsareonlypoweredwhenthesafetyswitchcover
isopenandaUSBcableispluggedin.
Input:AC125V50/60Hz350mA OperatingTemperature:-10ºCto35ºC
Output:DC5.2V2A RelativeHumidity:<=75%
Technical Specications: USB
15A,125V(NEMA5-15R)
Technical Specications: AC
ULFile#E339607 Patent Number US7,997,925
PatentedbyWinonElectricalCo.Ltd.
A video installation guide is available at: http://www.newertech.com/p2u-install