INTRODUCTION
NEWERTECH ADAPTADRIVE
1
INTRODUCTION
Drive Compatibility
The NewerTech AdaptaDrive is compatible with any 2.5” hard drive or SSD
that uses a standard SATA connector. It allows you to use these drives within
spaces that were originally designed for 3.5” SATA drives. The example
below shows the AdaptaDrive (with an SSD connected) mounted inside a
multi-bay, 3.5” drive enclosure.
Package Contents
• 1 drive bracket with SATA connector
• 8 pc. screw kit
INTRODUCTION
To Next Page
Loading...
