NEWERTECH ADAPTADRIVE
3
INSTALLATION
3. There are eight Phillips head screws included. Use the four with the
slightly narrower diameter and smaller screw head to fasten the NewerTech
AdaptaDrive to your drive.
Once the screws are fastened the
top view should look like the photo
at left. The AdaptaDrive can now
be integrated with your desktop
computer or drive chassis.
4. Insert the AdaptaDrive into the
computer or enclosure of your choice.
Four additional screws are included,
but you may find that your computer
or enclosure already includes screws
or other mounting components.
To Next Page
Loading...
