Newgy Robo-Pong 2055 User Manual

www.newgy.com
Robo-Pong 2055 and Robo-Pong 1055
OWNER'S MANUAL
•2055 Quick Start ......... 2
•1055 Quick Start ............. 4
•Operation .......................6
•Robot Positions ......... 18
•Misc. Adjustments ..... 19
•Drill Diagrams ..............21
•Speed Calib. Target . . 27
•RP.2.PC ......................... 28
•Important Notices .... 34
•Take-Down, 2055 ......35
•Maintenance ................37
•Chip Replacement ... 38
•Exploded Views ........ 39
•Parts List ...................... 44
•Warranty & Repair ... 46

Newgy Robo-Pong 2055 Specifications

General

Brand	Newgy
Model	Robo-Pong 2055
Category	Sports & Outdoors
Language	English

Summary

2055 Quick Start Guide

Verify All Parts

Unpack all robot parts and check for presence. Contact Newgy if any part is missing.

Pull Down Support Legs

Place robot on table with open front facing you. Pull curved black metal support legs towards you.

Spread Support Legs Apart

Spread out the robot's support legs to their fully open position.

2055 Quick Start Setup Steps

Attach Robot to Table

Secure robot to table by angling downward. Ensure support legs are wide and front triangle sits on table.

Place Balls in Bucket

Wash and dry balls, then place in the Ball Tray. Ensure balls are 40mm or 40+mm diameter.

Adjust Head Angle

Tilt head down by loosening Brass Knob, then re-tighten. Verify 'topspin' is at the top.

Attach Side Nets

Slip red flexible band of side nets over table net support base and loop over clamp screw.