Newport INFINITY INFCR - Section 5. Display Messages; Display Messages

5
SECTION 5. DISPLAY MESSAGES
Table 5-1. Display Messages
MESSAGE DESCRIPTION
RTD RTD Meter
RST Hard (power on) reset
INPT Input type
DEC.P Decimal point
RD.CF Reading configuration
S1.CF Setpoint 1 configuration
S2.CF Setpoint 2 configuration
S1.DB Setpoint 1 deadband
S2.DB Setpoint 2 deadband
OT.CF Output Configuration
P.BND Proportional band
M.RST Manual reset
OT.S.O Output scale and offset
LK.CF Lock out configuration
±OPN Sensor breaker or temperature outside the range
9999 Value overflow in setpoint/menu peak deviation routines
-1999 Value overflow in setpoint/menu peak deviation routine
ER1 2 coordinate format programming error
PEAK Peak value
PK.RS Peak reset
SP.RS Reset setpoints
TUNE Tuning proportional controller
SP1 Setpoint 1 value
SP2 Setpoint 2 value
ER2 One or more the following items have overflowed because of
decimal point change: setpoint values, setpoint deadbands,
proportional bands or manual reset.
30