SECTION 1. INTRODUCTION
1.1 UNPACKING
Remove the Packing List and verify that all equipment has been received. If there are any
questions about the shipment, use the phone numbers listed on the back cover to contact the
Customer Service Department nearest you.
Upon receipt of shipment, inspect the container and equipment for any signs of damage. Take
particular note of any evidence of rough handling in transit. Immediately report any damage to
the shipping agent.
The carrier will not honor any claims unless all shipping material is saved for their
examination. After examining and removing contents, save packing material and
carton in the event reshipment is necessary.
Verify that you receive the following items in the shipping box:
QTY DESCRIPTION
1 Indicator/controller with all applicable connectors attached.
1 Owner's Manual
1 Set Mounting brackets
1 QuickStart Manual
If you ordered any of the available options (except the "BL" Blank Lens option), they
will be shipped in a separate container to avoid any damage to your
indicator/controller.
1
1
To Next Page
Loading...
