4.3.7.5 Display
This submenu allows the user to select the color of the display--green, red,
amber.
Screen Update: Editable box to enter the display time in seconds between each
End Device.
Normal: Choose the display color of temperature when it is in the normal stage.
Alarm 1: Choose the display color of temperature when alarm 1 is true.
Alarm 2: Choose the display color of temperature when alarm 2 is true.
In order to display one color, set the same display color on all three
submenus.
If user wants the Display to change color every time when both Alarm 1
and Alarm 2 are triggered, the Alarm values should be set in such a way
that Alarm 1 value is always on the top of Alarm 2 value, otherwise value
of Alarm 1 will overwrite value of Alarm 2 and Display Color would not
change when Alarm 2 is triggered.
Figure 4.19a Display Menu
Screen Update (seconds)
3
Normal
Green
Alarm 1
Red
Alarm 2
Amber
Main Menu
SETUP
Display
SETUP
http://192.168.1.200
Address
Cancel
Update
44
To Next Page
Loading...
