Newtech Evoke User Manual

281 Heads Road, PO Box 2050, Wanganui, NZ
Phone: 06-349 0194 Fax: 06-344 2597
Email: sales@newtech.co.nz www.newtech.co.nz
INSTALLATION
 This product is designed to operate at 240V
 We recommend assembling towel rail to get accurate mounting positions prior to final installation.
 All heated towel rails must be installed by a registered electrician.
It is recommended they be installed 600mm from the floor.
 Fig. A also applies to installation of unheated towel rails.
Mounting
Screw
Plug and
Nut
Threaded
Socket
Plug and
Nut
Threaded
Socket
Heated Towel Rail Selection
GUARANTEE
Installation Instructions
Evoke & Quadro Heated Towel Rail

Newtech Evoke Specifications

General

Brand	Newtech
Model	Evoke
Category	Bathroom Fixtures
Language	English

Summary

Introduction to Newtech Heated Towel Rails

Care of Your Towel Rail

Instructions for cleaning the towel rail using mild detergents, avoiding harsh chemicals.

Safety Warnings and Precautions

Safety precautions for the appliance, including child supervision and minimum installation height.

Electrical Installation Requirements

Details electrical installation requirements, including registered electrician and wiring standards.

Product Guarantee and Warranty

Heated Towel Rail Specifications

Installation Methods for Towel Rails

Exposed Wiring Kit Installation

Diagram and steps for installing the towel rail using an exposed wiring kit.

Concealed Wiring Kit Installation

Diagram and steps for installing the towel rail using a concealed wiring kit.

Top Leg Installation

Diagram and steps for installing the towel rail with a top leg mounting configuration.